Fiberglass Geogrid
Coated, low-elongation fiberglass reinforcement grid for asphalt overlays, rehabilitation and reflective-crack management.
View details →VABREN PRODUCT
Plastic Geogrid
VABREN manufactures and supplies plastic geogrid in biaxial and uniaxial types. Choose PP biaxial geogrid for road-base reinforcement and ground stabilization, or HDPE uniaxial geogrid for reinforced soil walls and slopes. Compare grades and send your project requirements for a quotation.
MaterialBiaxial: polypropylene (PP); uniaxial: high-density polyethylene (HDPE)
Key specificationBiaxial yield load: 15–45 kN/m in both directions; uniaxial yield load: 25–300 kN/m
ApplicationsRoad base, railway foundations, parking areas, reinforced soil walls and slopes
CustomizationGeogrid type, strength grade, roll dimensions and packaging
Packaging & deliverySupplied in rolls with grade identification
SeriesBiaxial TGSG series and uniaxial TGDG series
Plastic geogrid: biaxial and uniaxial reinforcement
Plastic geogrid is an open-aperture polymer reinforcement produced by extrusion, punching and stretching. Biaxial grids carry tensile loads in two directions; uniaxial grids concentrate reinforcement along the main load direction.
Choose the geogrid for the application
Biaxial geogrid serves aggregate reinforcement in roads, railway foundations, airports and parking areas. Uniaxial geogrid serves reinforced soil retaining walls, steep slopes, embankments and bridge abutments. Match the reinforcement direction, grade and layout to the project design.
PRODUCT SPECIFICATION
Plastic geogrid specifications
PP biaxial geogrid for road-base reinforcement
PP biaxial geogrid is stretched in longitudinal and transverse directions to create a square aperture structure. The grid interlocks with aggregate for road-base reinforcement, subgrade stabilization, railway foundations, parking areas and working platforms.
PP biaxial geogrid specifications
| Grade | Yield load, longitudinal / transverse (kN/m) | Load at 2% strain, longitudinal / transverse (kN/m, ≥) | Load at 5% strain, longitudinal / transverse (kN/m, ≥) |
|---|---|---|---|
| TGSG15-15 | 15 / 15 | 5 / 7 | 8 / 10 |
| TGSG20-20 | 20 / 20 | 8 / 10 | 10 / 13 |
| TGSG30-30 | 30 / 30 | 11 / 13 | 15 / 15 |
| TGSG40-40 | 40 / 40 | 13 / 15 | 16 / 20 |
| TGSG45-45 | 45 / 45 | 16 / 20 | 25 / 22 |
| Property | Requirement |
|---|---|
| Longitudinal yield elongation | ≤13% |
| Transverse yield elongation | ≤16% |
| Biaxial roll width | 1–6 m |
HDPE uniaxial geogrid for retaining walls and slopes
HDPE uniaxial geogrid is stretched in one direction to form elongated apertures. It provides directional soil reinforcement for retaining walls, steep slopes, bridge abutments and embankments. Place the main reinforcement direction according to the engineered layout.
HDPE uniaxial geogrid specifications
| Grade | Yield load (kN/m, ≥) | Load at 2% strain (kN/m, ≥) | Load at 5% strain (kN/m) |
|---|---|---|---|
| TGDG25 | 25 | 6 | 12 |
| TGDG35 | 35 | 9 | 18 |
| TGDG50 | 50 | 10 | 25 |
| TGDG80 | 80 | 23 | 44 |
| TGDG110 | 110 | 30 | 60 |
| TGDG150 | 150 | 39 | 70 |
| TGDG170 | 170 | 45 | 90 |
| TGDG200 | 200 | 55 | 110 |
| TGDG220 | 220 | 59 | 120 |
| TGDG240 | 240 | 65 | 132 |
| TGDG260 | 260 | 78 | 157 |
| TGDG280 | 280 | 84.5 | 170 |
| TGDG300 | 300 | 90 | 182 |
| Property | Requirement |
|---|---|
| Uniaxial yield elongation | ≤10% |
Technical data and selection guides
Biaxial geogrid strength and aperture guide
Geogrid vs geocell for ground stabilization
For separation and filtration layers, compare staple fiber geotextile and filament polyester geotextile. For asphalt reinforcement, see fiberglass geogrid.
PROJECT INQUIRY
Request a plastic geogrid quotation
Send your quantity, destination and any project requirements.
Details to include with your inquiry
Send biaxial or uniaxial type, grade, required tensile load, quantity in m², roll dimensions, application, destination country and port, and project specification. Include the soil or aggregate details and reinforcement drawing.
Send project drawings and specifications to info@vabren.com. Include the product name, quantity and destination so we can match your documents to the inquiry.
WhatsApp: +86 133 5538 7555
Customization, production and samples
Made to specification: Most products are made to order according to the required specifications. Send the product, dimensions, grade and quantity for confirmation.
Production cycle: The production cycle for most orders is approximately 15 days. The schedule for the selected product and quantity is confirmed in the quotation. Production time does not include transport to the destination.
Minimum order quantity: The minimum order quantity varies by product and specification. Contact us with your requirements to confirm the quantity for your order.
Samples: Samples are provided free of charge; the customer pays the sample shipping costs. The sample type and size are confirmed according to the product requirements.
RELATED PRODUCTS
More in Geogrids