Cold Mix Asphalt
Ready-to-use cold-applied asphalt mixture for potholes, utility cuts and localized pavement repairs without on-site heating.
View details →VABREN PRODUCT
Pressure-Activated Cold Patch Asphalt
Ready-to-use pressure-activated cold patch for compacted pothole and localized pavement repair in cold or damp maintenance conditions.
Cold mix asphalt workshop
Explore the workshop layout, packaging equipment and bagged materials.
Explore the Workshop in 360°MaterialDense-graded mineral aggregate with formulated cold-patch asphalt binder
Key specificationConfirm aggregate grading, package weight, application temperature, lift thickness, density and shelf life against the selected grade’s technical data.
ApplicationsPotholes, utility cuts, edge breaks and localized municipal or highway maintenance
CustomizationAggregate gradation, binder formulation, climate grade, package size and test documentation reviewed per project
Packaging & deliveryPackage weight, artwork, pallet quantity and export wrapping are confirmed in the quotation.
Verification noteUse the selected grade’s current TDS, SDS and agreed test documentation to confirm the order specification.
Pressure-activated cold patch asphalt
This ready-to-use cold-applied repair mixture combines dense-graded mineral aggregate with a formulated asphalt binder. Compaction and subsequent traffic pressure help densify the repair and develop early stability without an on-site heating or mixing process.
Supply and technical documents
Available for supply. Request the technical documents for the selected grade with your quotation.
Packaging and material appearance
The gallery shows representative packaging and material appearance. Request photographs of the supplied grade and its current packaging with your quotation.
Grade selection
- Aggregate: Aggregate grading is confirmed for the selected grade and repair depth.
- Package: Package weight, artwork, pallet quantity and export wrapping are confirmed in the quotation.
- Lift thickness: Compacted lift thickness is confirmed for the selected grade, repair depth and available equipment.
- Placement temperature: Application limits are confirmed against the selected grade’s technical data and site conditions.
- Reference use: Estimate order quantity using the confirmed density, repair dimensions and site allowance.
- Storage: Shelf life and storage conditions follow the selected grade’s technical data.
Dry, damp and water-filled potholes
Remove loose pavement, mud, debris and standing water before placement. For repairs in standing water, request a grade with matching test evidence and written installation instructions.
Placement, compaction and reopening
- Inspect the defect and correct unstable base, pumping or drainage problems.
- Remove loose material and standing water; prepare sound edges where the approved repair method requires them.
- Place the mixture evenly with a small allowance for compaction.
- Compact from the perimeter toward the centre using a hand tamper, plate compactor, roller or vehicle tyre appropriate to the repair size.
- For deeper potholes, repeat placement and compaction in controlled lifts.
- Reopen after the surface is adequately compacted, stable and approximately flush with the surrounding pavement.
Testing and execution-standard framework
Potential reference methods include ASTM C136/AASHTO T27 for gradation, ASTM D6927/AASHTO T245 for Marshall properties, AASHTO T283 for moisture susceptibility and ASTM D6704 for workability. Listing a method does not claim compliance. The quotation must identify the governing project standard and whether a current TDS, SDS, COA, third-party report or order-specific test is required.
Information needed for a quotation
Please send pothole dimensions and depth, pavement type, traffic duty, lowest placement temperature, dry/damp/standing-water condition, available compaction equipment, required package weight, estimated quantity, destination and the requested test standard or report.
CATALOG-BASED DATA
Technical specifications
Use the selected grade’s current TDS, SDS and agreed test documentation to confirm the order specification.
| Product type | Ready-to-use, pressure-activated cold-applied asphalt repair mixture |
|---|---|
| Aggregate / gradation | Dense-graded mineral aggregate; request the proposed grade’s aggregate grading and mix specification for the repair depth, climate and traffic duty. |
| Package weight | Package weight, artwork, pallet quantity and export wrapping are confirmed in the quotation. |
| Recommended compacted lift | Compacted lift thickness is confirmed for the selected grade, repair depth and available equipment. |
| Reference placement temperature | Application limits are confirmed against the selected grade’s technical data and site conditions. |
| Reference quantity | Estimate order quantity using the confirmed density, repair dimensions and site allowance. |
| Storage life | Shelf life and storage conditions follow the selected grade’s technical data. |
| Surface condition | Dry and damp potholes are reference-suitable; remove mud, debris and standing water unless a wet-hole grade is specifically approved |
| Compaction | Hand tamper, plate compactor, roller or vehicle tyre, selected around repair size and traffic duty |
| Traffic reopening | After adequate compaction and a stable, flush surface; confirm any project hold time |
Available specification references
ASTM C136 / AASHTO T27Aggregate gradation reference
ASTM D6927 / AASHTO T245Marshall stability and flow reference where specified
AASHTO T283Moisture-susceptibility reference where required
ASTM D6704Cold-patch workability reference
Project specification / approved TDSGoverns acceptance; listed methods do not constitute a compliance claim
Typical performance indicators
| Selection item | Grade-specific data | Required confirmation |
|---|---|---|
| Aggregate | Aggregate grading is confirmed for the selected grade and repair depth. | Current job-mix formula and sieve results |
| Package | Package weight, artwork, pallet quantity and export wrapping are confirmed in the quotation. | Artwork, tolerance, pallet and container quantity |
| Lift thickness | Compacted lift thickness is confirmed for the selected grade, repair depth and available equipment. | Pothole geometry and available equipment |
| Temperature | Application limits are confirmed against the selected grade’s technical data and site conditions. | Lowest site temperature and current grade TDS |
| Density / use | Estimate order quantity using the confirmed density, repair dimensions and site allowance. | Batch bulk/compacted density and field wastage |
| Shelf life | Shelf life and storage conditions follow the selected grade’s technical data. | Formulation-specific declaration and storage conditions |
| Water condition | Dry or damp; standing water removed | Wet-hole grade evidence if placement in water is requested |
| Opening | After sufficient compaction | Surface stability and governing traffic-control plan |
Common performance requirements
| Factory document | Current TDS / SDS | Formulation, limits, handling and safety |
|---|---|---|
| Order evidence | COA or agreed test report | Must match the selected grade or production batch |
| Project acceptance | Specified test methods | Confirmed before price and production approval |
Confirm with your inquiry
Pothole length, width and depth, pavement type, traffic duty, lowest application temperature, dry/damp/standing-water condition, compaction equipment, package preference, quantity, destination and required test standard or report.
Related selection and installation guides
Use these resources to prepare your material specification and installation questions.
PROJECT INQUIRY
Request a specification and quotation
Send your quantity, destination and any project requirements.
Details to include with your inquiry
Send the pothole dimensions and depth, pavement type, traffic duty, lowest placement temperature, dry, damp or standing-water condition, compaction equipment, package preference, quantity, destination and required test report or project standard.
Send project drawings and specifications to info@vabren.com. Include the product name, quantity and destination so we can match your documents to the inquiry.
WhatsApp: +86 133 5538 7555
Customization, production and samples
Made to specification: Most products are made to order according to the required specifications. Send the product, dimensions, grade and quantity for confirmation.
Production cycle: The production cycle for most orders is approximately 15 days. The schedule for the selected product and quantity is confirmed in the quotation. Production time does not include transport to the destination.
Minimum order quantity: The minimum order quantity varies by product and specification. Contact us with your requirements to confirm the quantity for your order.
Samples: Samples are provided free of charge; the customer pays the sample shipping costs. The sample type and size are confirmed according to the product requirements.
RELATED PRODUCTS
More in Cold Mix Asphalt