Composite Geomembrane
Geotextile-laminated polymer barrier for integrated seepage control, mechanical protection and civil engineering installation.
View details →VABREN PRODUCT
Smooth HDPE Geomembrane
VABREN manufactures and supplies smooth HDPE geomembrane liners for water containment, wastewater, landfill and mining projects. Review thicknesses from 0.2 to 3.0 mm, roll sizes and the appropriate technical schedule, then send your quantity, destination and project specification for a quotation.
MaterialHDPE
Key specificationThickness: 0.2–3.0 mm; roll width: 1–8 m; roll length: 50–100 m
ApplicationsLandfills, reservoirs, ponds, mining and wastewater
CustomizationThickness, roll dimensions, color and packaging reviewed per project
Packaging & deliveryRolls with protective wrapping; labels, core support and loading plan confirmed per order
Verification noteSelect the technical grade and governing standard; confirm order-specific test documents and acceptance criteria before supply.
HDPE smooth geomembrane overview
VABREN manufactures and supplies HDPE smooth geomembrane for containment, waterproofing and environmental barrier systems. Available specifications are selected according to project requirements, installation conditions and applicable standards.
HDPE smooth geomembrane is a low-permeability polyethylene liner designed to contain water, wastewater, process liquids and solid waste. Carbon black and stabilizing additives support outdoor durability, while the smooth surfaces allow adjoining rolls to be joined by controlled thermal welding.
Key product advantages
- Low permeability for reliable liquid and waste containment.
- Strong resistance to many chemicals, weathering and ultraviolet exposure.
- High tensile, tear and puncture performance across multiple thickness grades.
- Heat-weldable seams support large continuous lining systems.
- Roll width, length, thickness, color and packaging can be reviewed for the project.
Typical applications
Common uses include landfill base and cap systems, wastewater lagoons, reservoirs, aquaculture ponds, mining facilities, heap-leach pads, evaporation ponds, canals, secondary containment and industrial lining projects.
Product selection
Select the liner around the contained medium, design life, exposure condition, subgrade, required thickness, interface friction, welding plan and applicable project specification. Smooth HDPE is normally selected for flat or moderately sloped containment areas; textured grades may be preferred where higher interface friction is required.
Installation and welding
Prepare a stable, smooth subgrade and protect the liner from sharp objects. Adjacent panels are commonly joined using hot-wedge welding, with extrusion welding used for details and repairs. Seam inspection and testing requirements should be agreed before installation.
Packaging and delivery
Geomembrane is supplied in protected rolls. Roll labels, core support, loading arrangement and export protection are confirmed according to the selected dimensions, quantity and transport route.
Information needed for a quotation
Please send the application, required thickness and roll size, total area or quantity, destination port, project specification and any requested test documentation. VABREN will confirm the available grade before issuing the offer.
PRODUCT SPECIFICATION
Smooth HDPE geomembrane specifications
Catalog reference requirements transcribed from the supplied brochure. Select one schedule for your order; these are not measured batch results or a certification.
HDPE liner thickness and roll sizes
| Thickness | Roll width | Roll length |
|---|---|---|
| 0.2–3.0 mm | 1–8 m | 50–100 m |
General smooth HDPE geomembrane: GH-1
| Thickness (mm) | Tensile strength at yield (N/mm) | Tensile strength at break (N/mm) | Right-angle tear resistance (N) | Puncture resistance (N) |
|---|---|---|---|---|
| 0.30 | ≥4 | ≥6 | ≥34 | ≥72 |
| 0.50 | ≥7 | ≥10 | ≥56 | ≥120 |
| 0.75 | ≥10 | ≥15 | ≥84 | ≥180 |
| 1.00 | ≥13 | ≥20 | ≥115 | ≥240 |
| 1.25 | ≥16 | ≥25 | ≥140 | ≥300 |
| 1.50 | ≥20 | ≥30 | ≥170 | ≥360 |
| 2.0 | ≥26 | ≥40 | ≥225 | ≥480 |
| 2.5 | ≥33 | ≥50 | ≥280 | ≥600 |
| 3.0 | ≥40 | ≥60 | ≥340 | ≥720 |
| Property | Requirement |
|---|---|
| Density | ≥0.940 g/cm³ |
| Elongation at yield (MD/TD) | 11% (0.75–3.0 mm); — (0.30 / 0.50 mm) |
| Elongation at break (MD/TD) | 600% |
| Carbon black content | 2.0–3.0% |
| Carbon black dispersion | No more than 1 of 10 results may be Grade 3; Grades 4 and 5 are not permitted. |
| Standard oxidation induction time (OIT) | ≥60 min |
| Low-temperature impact brittleness | Pass |
| Water-vapor permeability | ≤1.0×10⁻¹³ g·cm/(cm²·s·Pa) |
| Dimensional stability | ±2.0% |
Environmental smooth HDPE geomembrane: GH-2S
| Thickness (mm) | Tensile strength at yield (N/mm) | Tensile strength at break (N/mm) | Right-angle tear resistance (N) | Puncture resistance (N) |
|---|---|---|---|---|
| 0.75 | ≥11 | ≥20 | ≥93 | ≥240 |
| 1.0 | ≥15 | ≥27 | ≥125 | ≥320 |
| 1.25 | ≥18 | ≥33 | ≥160 | ≥400 |
| 1.5 | ≥22 | ≥40 | ≥190 | ≥480 |
| 2.0 | ≥29 | ≥53 | ≥250 | ≥640 |
| 2.5 | ≥37 | ≥67 | ≥315 | ≥800 |
| 3.0 | ≥44 | ≥80 | ≥375 | ≥960 |
| Property | Requirement |
|---|---|
| Density | ≥0.940 g/cm³ |
| Elongation at yield (MD/TD) | ≥12% |
| Elongation at break (MD/TD) | ≥700% |
| Stress crack resistance | ≥300 h |
| Carbon black content | 2.0–3.0% |
| Carbon black dispersion | No more than 1 of 10 results may be Grade 3; Grades 4 and 5 are not permitted. |
| Standard oxidation induction time (OIT) | ≥100 min |
| High-pressure oxidation induction time (OIT) | ≥400 min |
| 85°C heat-aging indicator | ≥55% |
| UV-resistance indicator | 50% |
| Thickness limit deviation | -10% |
Landfill smooth HDPE geomembrane
| Thickness (mm) | Tensile strength at yield (N/mm) | Tensile strength at break (N/mm) | Right-angle tear resistance (N) | Puncture resistance (N) |
|---|---|---|---|---|
| 0.75 | ≥11 | ≥20 | ≥93 | ≥240 |
| 1.0 | ≥15 | ≥27 | ≥125 | ≥320 |
| 1.25 | ≥18 | ≥33 | ≥156 | ≥400 |
| 1.5 | ≥22 | ≥40 | ≥187 | ≥480 |
| 2.0 | ≥29 | ≥53 | ≥249 | ≥640 |
| 2.5 | ≥37 | ≥67 | ≥311 | ≥800 |
| 3.0 | ≥44 | ≥80 | ≥374 | ≥960 |
| Property | Requirement |
|---|---|
| Density | ≥0.939 g/cm³ |
| Elongation at yield (MD/TD) | ≥12% |
| Elongation at break (MD/TD) | ≥700% |
| Stress crack resistance | ≥300 h |
| Carbon black content | 2.0–3.0% |
| Carbon black dispersion | No more than 1 of 10 results may be Grade 3; Grades 4 and 5 are not permitted. |
| Standard oxidation induction time (OIT) | ≥100 min |
| High-pressure oxidation induction time (OIT) | ≥400 min |
| 85°C heat-aging indicator | ≥55% |
| UV-resistance indicator | 50% |
| Dimensional stability | ±2.0% |
Yield, break and tear values apply in both machine and transverse directions (MD/TD). Water-vapor permeability is reported in the brochure unit and is not hydraulic conductivity in m/s.
Technical data and product selection
Download the English specification, compare liner surfaces, or review pond-lining and welding requirements before requesting a quote.
Related selection and installation guides
Use these resources to prepare your material specification and installation questions.
PROJECT INQUIRY
Request a smooth HDPE geomembrane quotation
Send your quantity, destination and any project requirements.
Details to include with your inquiry
Send the application, quantity in m², destination country and port, thickness, roll width and length, required technical grade and project standard. Include chemical exposure, welding or inspection requirements where applicable. Pricing depends on the confirmed specification, quantity and delivery requirements.
Send project drawings and specifications to info@vabren.com. Include the product name, quantity and destination so we can match your documents to the inquiry.
WhatsApp: +86 133 5538 7555
Customization, production and samples
Made to specification: Most products are made to order according to the required specifications. Send the product, dimensions, grade and quantity for confirmation.
Production cycle: The production cycle for most orders is approximately 15 days. The schedule for the selected product and quantity is confirmed in the quotation. Production time does not include transport to the destination.
Minimum order quantity: The minimum order quantity varies by product and specification. Contact us with your requirements to confirm the quantity for your order.
Samples: Samples are provided free of charge; the customer pays the sample shipping costs. The sample type and size are confirmed according to the product requirements.
